Provide accurate measurements from the top of the double seam to the bottom of the countersink adjacent to the chuck wall. Gauges for beverage cans are 4” long and use a carbide tip with a .015” radius. Gauges for sanitary cans are 7” long, and use a .030” radius carbide tip. Countersink gauges can be equipped with either a 2” diameter Inch dial indicator which reads to .001”, a 2” diameter Metric dial indicator which reads to .01mm, or a digital indicator which is switchable between inch/mm, and reads to .0001”/.001mm. The digital indicator has an SPC output for connection to automated seam analysis systems such as the WACO Accuseam 2000. All WACO countersink gauges are supplied in a foam lined plastic case.
Cat. No. Description
10772-00 WACO Countersink Gauge,7” long, with Inch Dial Indicator .001”, for sanitary cans
10772-05 WACO Countersink Gauge,4” long, with Inch Dial Indicator .001”, for beverage cans
10772-50 WACO Countersink Gauge with Metric Dial Indicator .01mm, 7” long, for sanitary cans
10772-55 WACO Countersink Gauge with Metric Dial Indicator.01mm, 4” long, for beverage cans
10772-25 WACO Digital Countersink Gauge, 7” long, for sanitary cans, .0001”/.001mm
10772-26 WACO Digital Countersink Gauge, 4” long, for beverage cans, .0001”/.001mm
Replacement Countersink Tips for WACO Dial Countersink Gauges:
10724-17 Carbide Countersink Tip, .015”R, for beverage cans, .625” long
10724-19 Carbide Countersink Tip, .030”R, for sanitary cans, .625” long
Replacement Countersink Tips for WACO Digital Countersink Gauges, and Ames Gauges:
10772-10 Carbide Countersink Tip, .015”R, for beverage cans, .500” long
10772-11 Carbide Countersink Tip, .030”R, for sanitary cans, .500” long
|